Intended Use - ABB Welcome IP IPTouch 7" Series Product Manual

3

Intended use

This device is a central control panel of the ABB-Welcome IP system and operates exclusively
with components from this system. The device must only be installed in dry indoor rooms.
Product range
This product manual applies to the following products:
Article no.
H82364-./H82364-.-02
H82365-./H82365-.-02
H82366-./H82366-.-02
WIFI installation
Note
If the device support WIFI function, please make sure the device has good WIFI
signal reception before installation. The distance between the router and
monitors, and the construction materials used in the walls are factors that can
affect signal quality.
The WIFI signal is not strong enough to guarantee correct operation. A WIFI
repeater must be installed between the router and this device in order to boost
the WIFI signal received by this device.
Product manual 2TMD041800D0002
Description
IP touch 7, LAN+WIFI, with induction loop
IP touch 7, LAN+LAN, with induction loop
IP touch 7, LAN, with induction loop
Intended use
│6