Table of Contents
Advertisement
8.3.3
Outdoor station settings
These settings are only supported by the pushbutton outdoor station.
Outdoor station enters engineering mode
Power on the outdoor station, wait until all 3 LED indicators go out.
■
■
Press the first button on the outdoor station and hold for 10 s until all 3 LED indicators flash.
Tip
The outdoor station will exit engineering mode after 5 minutes.
Indoor station goes to the settings page
On the "Engineering settings" screen, click "Outdoor station settings" to access the
corresponding screen.
Product manual 2TMD041800D0002
Commissioning
│73
Advertisement
Table of Contents
Need help?
Do you have a question about the Welcome IP IPTouch 7" Series and is the answer not in the manual?