Table of Contents
Advertisement
Promise Technology
M
e
ounting
ncloSure in a
Note
Please refer to the Quick Installation Guide included with the mounting rails for
more detailed rack installation instructions.
To install the Vess A6000 into a rack with the supplied mounting rails:
1. Check the fit of the mounting rails in your rack system.
2. Adjust the length of the mounting rails as needed.
• The rear rail slides inside the front rail. The rail halves are riveted together and use no adjustment screws.
• The front-left and front-right mounting rail ends are labeled.
• Be sure the front rail support is on the bottom facing inward
• All rail ends, front and rear, attach at the outside of the rack posts.
• The guide pins at the rail ends align with the holes in the rack posts.
• Use the attaching screws and flange nuts from your rack system. Tighten the screws and nuts according to
instructions for your rack system.
Installing the rails onto the rack
Front left label
Support flange on the front
end of each rail
r
ack
15
Front right label
Guide pins on rails align with holes in the rack post
Product Manual
Advertisement
Table of Contents
