V-ZUG GAS411 Installation Instructions Manual
Multi-sliders
Hide thumbs
Also See for GAS411:
- Operating instructions manual (32 pages) ,
- Installation instructions manual (8 pages) ,
- Operating instructions manual (32 pages)
Table of Contents
Advertisement
Quick Links
Installation instructions
Built-in variants of gas hob
Multi-sliders GAS411/421/641/951
The appliance must be installed by qualified personnel only. Each step must be carried out and checked in full in the
order specified.
Check that the local connection conditions (gas type and gas pressure) and the appliance setting match before con-
necting the appliance.
The default values for this appliance are provided on the information plate (or on the identification plate).
This appliance is not connected to a combustion by-product outlet. It must be set up and connected according to the
applicable installation conditions. Particular attention must be paid to the relevant ventilation requirements.
If installing into a combustible material, the guidelines and standards for low voltage installations and fire protection
must be strictly observed.
Validity
These installation instructions apply to the following models:
Product family
31063
31064
31071
31072
General notes
Identification plate
The identification plate and stickers with the permissible
gas types and safety precautions are located on the under-
side of the hob.
▸
Affix the second identification plate (supplied) in an accessible position behind the front of the fitted cabinet beneath the appliance.
Care and maintenance
▸
Follow the care and cleaning advice in the operating instructions.
▸
Follow the basic maintenance advice in the operating instructions.
Type
GAS411GSAZ
GAS421GSAZ
GAS641GSAZ
GAS951GSAZ
1
1009441-R07
Appliance class
Class 3
DIN EN 30-1-1
Identification plate
Depending on
appliance, plate
with additional
information
1009441-R07
25/07/2017
Advertisement
Table of Contents
Related Manuals for V-ZUG GAS411
Summary of Contents for V-ZUG GAS411
- Page 1 1009441-R07 Installation instructions 25/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1009441-R07 The appliance must be installed by qualified personnel only. Each step must be carried out and checked in full in the order specified. Check that the local connection conditions (gas type and gas pressure) and the appliance setting match before con- necting the appliance.
- Page 2 1009441-R07 Installation instructions 25/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1009441-R07 Installation accessories provided For all installation variants: Designation Art. no. 4 adjusting braces H61561 Sealing ring gas connection 18 × 13 × 1.5 mm H64006 Flush installation: Designation Art.
-
Page 3: Surface-Mounted Installation
1009441-R07 Installation instructions 25/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1009441-R07 Surface-mounted installation The cooking zone layout of the hob to be fitted may differ from the hob illustrated! GAS411GSAZ, GAS421GSAZ GAS641GSAZ GAS951GSAZ Y – Y T ≥90 Drawer/... -
Page 4: Flush Installation
1009441-R07 Installation instructions 25/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1009441-R07 Flush installation The cooking zone layout of the hob to be fitted may differ from the hob illustrated! GAS411GSAZ, GAS421GSAZ GAS641GSAZ GAS951GSAZ Detail Z Y – Y R0–5 T ≥90... -
Page 5: Electrical Connection
1009441-R07 Installation instructions 25/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1009441-R07 Installation ▸ Create an accurate installation cut-out. – The mounting surface can be reamed out or created by installing wood/stone supports or using the steel angle set (see Ac- cessories). - Page 6 1009441-R07 Installation instructions 25/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1009441-R07 Ventilation In order to guarantee minimum ventilation, a space of ≥20 mm height is ne- cessary beneath the appliance. The rear panel of the base unit must be open around the work surface cut-out to guarantee continuous air circulation via the ventilation slits.
-
Page 7: Gas Connection
1009441-R07 Installation instructions 25/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1009441-R07 Gas connection The gas connection and the conversion to another gas type must be carried out by an authorized installer. 32.5 GAS411 GAS421 GAS641 32.5 GAS951 ▸ The gas connection must be positioned so that the stop-cock and the supply connection point are accessible with the appliance in- stalled. - Page 8 Hold both sliders to the left of the button depressed at the same time for 4 seconds. – An acoustic signal is emitted. For appliance GAS411, simply press the single slider ▸ Use the button to select the next highest and the button the next lowest user setting.
- Page 9 1009441-R07 Installation instructions 25/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1009441-R07 ▸ To save entries: Hold the buttons depressed at the same time for 2 seconds. – An acoustic signal is emitted. – The «Service menu» mode is ended.
-
Page 10: Conversion To Another Gas Type
Installation instructions 25/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1009441-R07 Conversion to another gas type The appliance is set up for a certain gas type, which is also recorded on the identification plate. The appliance can be converted to an- other type of gas using the nozzle set supplied (others available as accessories). - Page 11 1009441-R07 Installation instructions 25/07/2017 Built-in variants of gas hob Multi-sliders GAS411/421/641/951 1009441-R07 Technical data GAS411GSAZ Nominal heat input Gas type Test gas Connection pressure Total Natural gas H/E 20 mbar 6 kW 6 kW Natural gas H/E 25 mbar Natural gas RU...