Product Specifications; Cable And Wiring Information; Product Cleaning Instructions - Fostex PM-2 Reference Manual

Professional studio monitor

Hide thumbs

Table of Contents

Cabinet Dimensions

254mm (W) x 411mm (H) x 300mm (D) includes heatsink

271mm (D) cabinet only - no heatsink

10" (W) x 16

" x 11

1/8

" (D) cabinet only - no heatsink

3/5

Net Weight

14.7 Kg

32.4 Pounds

Gross Weight (includes all packing material)

16.2 Kg

35.7 Pounds

Frequency Response

Free-Field Frequency Response: ± 2dB 50Hz to 20KHz

Low Frequency Cutoff: 40Hz (-10dB)

High Frequency Cutoff: 22KHz (-10dB)

Low Frequency Control: ± 3dB (at 60Hz)

High Frequency Control: ± 3dB (at 5KHz)

Product improvement may warrant a change of specifications, newer material or cosmetics. Changes in

specifications and features may be made without notice or obligations.

User high-quality, shielded cables to connect your mixing console, workstation or other source to your

monitors. Foil-shielded cables, such as Belden 8451, 8761, or 9501 should do quite well. Other high

quality cables are available and those that incorporate better shielding will yield an overall higher noise

rejection, lowering your systems susceptibility to external interference. Another important tip to keep in

mind when wiring your system is to route all line level cables away from the AC and other power

sources, this will reduce the probability of having AC hum emanating from your studio monitors.

Prior to cleaning the PM-2 monitor the power must be disconnected from the PM-2 monitor. Once the

power has been terminated, cleaning can be accomplished using a damp (not wet) cleaning rag. A light

common household cleaner can also be used, but care must be taken not to use harsh cleaning fluids.

Regular dusting or cleaning with a damp rag will keep your product looking new for years.