Download Print this page

Product Specifications; Cable And Wiring Information; Product Cleaning Instructions - Fostex Speaker User Manual

Fostex speaker user manual

Advertisement

Cabinet Dimensions
297mm (W) x 400mm (H) x 420mm (D) incudes heatsink
385mm (D) cabinet only - no heatsink
11 11/16" (W) x 15 3/4" (H) x 16 1/2" (D) includes heatsink
15 1/8" (D) cabinet only - no heatsink
Net Weight
16 Kg
35.3 Pounds
Cross Weight (includes all packing material)
18.5 Kg
40.8 Pounds
Subwoofer Frequency Response
Free Field Frequency Response: 20Hz ~ 70Hz
XLR Outputs Frequency Response
Low Frequency Cutoff : 65Hz (-10dB)
Subwoofer Phase
Phase switch : + and -
Product improvement may warrant a change of specifications, newer materials or cosmetics, Changes in specifications
and features may be made without notice or obligations.
Use high-quality, shielded cables to connect your mixing console, workstation or other source to your
monitors. Foil-shielded cables, such as Beholden 8451, 8761, or 9501 should do quite well. Other high
quality cables are available and those that incorporate better shielding will yield an overall higher noise
rejection, lowering your systems susceptibility to external interference. Another important tip to keep in
mind when wiring your system is to route all line level cables away from the AC and other power
sources, this will reduce the probability of having AC hum emanating from your studio monitors.
Prior to cleaning the PM0.5-Sub MK
terminated, cleaning can be accomplished using a damp (not wet) cleaning rad. Do not use any abrasive
or chemically harsh cleaning fluids.
Regular dusting with damp rag cleaning will keep your product looking new for years.
p-6

Product Specifications

Cable and Wiring Information

HOT (+)
COLD (-)
SHIELD (
GROUND

Product Cleaning Instructions

the power must be disconnected from. Once the power has been
Amplifier Power
110Watts@1%
Amplifier Distortion
%
<0.002
Amplifier Signal to Noise Ratio
> 80dB
Power Requirements
US : 120VAC ~ 60Hz
EUR/UK : 230VAC ~ 50/60Hz
Power Consumption
US : 75 Watts
EUR/UK : 80 Watts
Driver. 8" Magnetically shielded
XLR
TRS
PIN 2
TIP
PIN 3
RING
)
PIN 1
SHIELD
THD @ 50 Watts / 4Ohm
RCA
TIP
SHIELD

Advertisement

loading

This manual is also suitable for:

Pm-0.5 sub mkii