Table of Contents
Advertisement
Supervisor level
Further cooling
Before the end of the programme, the
temperature of the dried laundry is
monitored and the cooling phase at
the end of the programme is extended
if necessary.
Changing this setting leads to increased
energy consumption.
– Factory default: Off
– On
Cooling down temperature
The laundry will be cooled down auto-
matically before the end of the pro-
gramme. The automatic cooling-down
phase which takes place before the
end of a programme can be set at a
cooler level for all programmes. This
means that the cooling phase is exten-
ded.
Changing this setting leads to increased
energy consumption.
The setting can be changed from
40 °C–55 °C.
Factory default: 55 °C
84
Service
Clean the airways
The tumble dryer's electronics calcu-
late the degree at which fluff or deter-
gent residue in the fluff filters and air
ducts are impairing performance. A
message to check the contamination
appears. You can decide at what level
of fluff this reminder should be emit-
ted.
This prompt, which you can configure,
is displayed:
Clean airways
– Off
The prompt does not appear. How-
ever, if there is a very severe block-
age in the ducting, the programme
will be cancelled and the prompt will
appear in the display regardless of
this option.
– Heavy
The prompt only appears when there
is a heavy build-up of fluff.
– Factory default: Normal
– Light
The prompt appears when a minor
build-up of fluff is detected.
Advertisement
Table of Contents
