Dismantling The Fluff Filter; Cleaning The Fluff Filter Components When Dry; Cleaning The Fluff Filter Components When Wet - Miele PDR 908 EL Marine Operating And Installation Instructions

 Use the handle to pull out the fluff fil-
ter.

Dismantling the fluff filter

 Hold onto both handles on the fluff fil-
ter.
 Turn the inner section of the fluff filter
anti-clockwise (1) slightly until you
feel it engage.
 Pull apart the two parts of the fluff fil-
ter (2).
Cleaning and care
Cleaning the fluff filter components
when dry
Tip: Use a vacuum cleaner to achieve
the best possible cleaning results.
 Use your fingers or a vacuum cleaner
to wipe fluff off the filter.
Cleaning the fluff filter components
when wet
If there is a lot of compacted fluff on the
fluff filter components, you should also
clean them under warm running water.
If the fluff filter is wet, it could cause
operational faults.
Shake both parts thoroughly and
then dry them carefully.
47