Bottom Cover - HP 340S G7 Maintenance And Service Manual

Bottom cover

Table 5-1 Bottom cover descriptions and part numbers
Description
Bottom cover
Rubber feet
Before removing the bottom cover, follow this step:
Prepare the computer for disassembly
▲
Remove the bottom cover:
1. Peel the two rubber feet off the bottom cover.
2. Remove the five Phillips M2.0 × 6.0 screws (1) from the bottom cover.
3. Remove the two Phillips M2.5 × 6.0 screws (2) from the bottom cover.
4. Remove the two Phillips M2.0 × 4.0 screws (3) from the bottom edge of the bottom cover.
(Preparation for disassembly on page
Spare part number
L82275-001
L65866-001
24).
Component replacement procedures 25