Table of Contents
Advertisement
Access from the user program
Default mapping for: Profibus and Interbus Coupler
Conditions
Complete evaluation: no
Motorola format: yes
Word alignment: any
Conditions
Complete evaluation: yes
Motorola format: no
Word alignment: no
Conditions
Complete evaluation: yes
Motorola format: yes
Word alignment: no
Default mapping for: Lightbus & Ethernet coupler and Bus Terminal Controller (BCxxxx, BXxxxx)
Conditions
Complete evaluation: yes
Motorola format: no
Word alignment: yes
Conditions
Complete evaluation: yes
Motorola format: yes
Word alignment: yes
Key
Complete evaluation
Motorola format
Word alignment
Ch n CB
Ch n SB
Ch n D0
Ch n D1
"-"
Res.
5.2.2
KL3002
Default mapping for: CANopen, CANCAL,DeviceNet, ControlNet, Modbus, RS232 and RS485 coupler
Conditions
Complete evaluation: no
Motorola format: no
Word alignment: any
32
Word offset
0
1
2
3
Word offset
0
1
2
3
Word offset
0
1
2
3
Word offset
0
1
2
3
Word offset
0
1
2
3
The terminal is mapped with control and status byte.
Motorola or Intel format can be set.
The terminal is positioned on a word boundary in the Bus Coupler.
Control byte for channel n (appears in the process image of the outputs).
Status byte for channel n (appears in the process image of the inputs).
Channel n, data byte 0 (byte with the lowest value)
Channel n, data byte 1 (byte with the highest value)
This byte is not used or occupied by the terminal.
Reserved: This byte is assigned to the process data memory, although it is not used.
Word offset
0
1
2
3
Version: 4.2
High byte
Low byte
Ch1 D0
Ch1 D1
-
-
-
-
-
-
High byte
Low byte
Ch1 D0
Ch1 CB/SB
-
Ch1 D1
-
-
-
-
High byte
Low byte
Ch1 D1
Ch1 CB/SB
-
Ch1 D0
-
-
-
-
High byte
Low byte
Res.
Ch1 CB/SB
Ch1 D1
Ch1 D0
-
-
-
-
High byte
Low byte
Res.
Ch1 CB/SB
Ch1 D0
Ch1 D1
-
-
-
-
High byte
Low byte
Ch1 D1
Ch1 D0
Ch2 D1
Ch2 D0
-
-
-
-
KL3001, KL3002
Advertisement
Table of Contents
