Table of Contents
Advertisement
Installation
When installing the refrigeration appli-
ance, please note the following:
- The socket must be easily accessible
in an emergency, not concealed be-
hind the appliance.
- The plug and mains connection cable
must not touch the rear of the refri-
geration appliance as they could be
damaged by vibrations from the ap-
pliance.
- Other appliances must also not be
plugged into a socket located directly
behind the refrigeration appliance.
- When installing the refrigeration ap-
pliance, make sure that the mains
connection cable does not get
trapped or damaged.
- Do not position or operate multi-
socket adapters, distributor strips or
other electronic devices (e.g. halogen
transformers) at the rear of the appli-
ance.
- The floor at the installation site must
be horizontal and level and must be
as high as the surrounding floor.
Side-by-side combinations
Risk of damage due to condens-
ation on external appliance panels.
In environments with high humidity
and a lack of ventilation, condensa-
tion can build up on external appli-
ance panels, which can cause corro-
sion.
Do not place refrigeration appliances
directly next to or on top of one an-
other.
16
Climate range
This refrigeration appliance is designed
for use within specific ambient temper-
atures (climate range). Do not use in
ambient temperatures for which it is not
designed.
A lower ambient temperature leads to
the compressor switching off for longer
periods. This can cause the internal
temperature in the refrigeration appli-
ance to rise with the risk of food deteri-
orating and going off.
The climate range is stated on the data
plate in the interior cabinet of the refri-
geration appliance.
Climate range
SN
N
ST
T
SN-ST
SN-T
A refrigeration appliance from the SN
climate range can operate without any
difficulties in rooms with a cooler am-
bient temperature (down to +5 °C).
Ambient temper-
ature
10 to 32 °C
16 to 32 °C
16 to 38 °C
16 to 43 °C
10 to 38 °C
10 to 43 °C
Advertisement
Table of Contents
