Table of Contents
Advertisement
Installation
Installation location
This appliance should be installed in a
dry, well-ventilated room.
When deciding where to install your ap-
pliance, please bear in mind that the
energy consumption will increase if in-
stalled near to a heater, a cooker, or
other appliance that gives off heat. Di-
rect sunlight should also be avoided.
The higher the room temperature, the
longer the compressor has to run and
the higher the energy consumption is.
When installing the appliance, please
note:
- The socket must be easily accessible
in an emergency and not concealed
behind the appliance.
- The plug and cord must not touch
the back of the appliance as they
could be damaged by vibrations from
the appliance.
- Do not plug other appliances into
sockets behind this appliance.
78
Risk of damage due to conden-
sation on external appliance panels.
In environments with high humidity,
condensation can build up on exter-
nal appliance panels, which can
cause corrosion.
To prevent this, it is advisable to in-
stall the appliance in a dry and/or air-
conditioned room with sufficient ven-
tilation.
After installation, make sure that the
appliance door closes properly, that
the specified ventilation gaps are ad-
hered to, and that the refrigeration
appliance has been installed in ac-
cordance with these installation in-
structions.
Climate range
This refrigeration appliance is designed
for use within specific ambient temper-
atures (climate range). Do not use in
ambient temperatures for which it is not
designed. The climate range is stated
on the data plate in the interior cabinet
of the refrigeration appliance.
Advertisement
Table of Contents
