Table of Contents
Advertisement
The modular point source nature of VARIA lends itself to building custom coverage patterns to match room geometries. In this
fashion, simple arrays such as the one shown below are straightforward. The MPS connector is the only connector needed and
are provided with each loudspeaker.
Each connector includes four 1/4" shackle pic points that can used to directly connect suspension hardware to the array.
This 'SHACKLE' mode has some limitations
1. No more than 5 enclosures.
2. Subwoofers are not included in the array.
3. No more than 150lbs loaded on any one shackle point.
4. Connectors can only accept pull forces in plane with the steel. No rotations or outward bridles.
NOTE: The RHANG frame does not have these limitations.
For larger arrays and where rigging requirements include bridles or odd angles, the RHANG frame is required. When utilized prop-
erly, arrays of up to 2000lbs can be assembled with both the standard and WR versions.
RHANG—The RHANG frame connects directly to any of the VARIA enclosures in
the same manner all other connectors (M8 bolts). Once connected, rigging hard-
ware can be used to connect to any of the eight 15/16" holes in the frame. Us-ing
four pic points, the frame is rated to safely suspend arrays of up to 24 enclosures.
REAR PICK BAR— In addition to the RHANG frame, for pull back conditions that
require bridles or larger rigging hardware than 1/4" shackles, the REAR PICK bar is
used and simply bolts into the center hole on each connector. The REAR PICK bar
connects with M8 x 25mm bolts provided.
Point Source Array Modules
7
Advertisement
Table of Contents
