BIG ASS FANS Haiku S3127-A2 Installation Manual page 14

Wire the Fan
8
Disconnect power to the fan location before wiring the fan!
Do not connect the fan to a damaged power source! Do not attempt to resolve electrical failures on your own. Consult a
qualified electrician if uncertain of the electrical installation of this fan.
Wire the fan as shown in the diagram using the wire connectors (Fig. 8). If your fan packaging included an EMI filter, install it as shown.
Attach the green ground wire to the mount with the unpainted screw. Connect the wiring harness from the power supply to the wiring
harness from the extension tube, making sure that the wiring and safety cable are routed in the same direction.
Fig. 8
12
North America
100–120 V
AC Hot/L1
Black
Brown
AC Neutral/L2
White
Blue
PE/Earth Ground Green or Bare
Green with Yellow Copper
REV. H
All other regions
Brown
Blue
Green with Yellow
| © 2018 BIG ASS FANS | ALL RIGHTS RESERVED