Fortinet FortiGate FortiGate-3016B Install Manual page 17

Installing the FortiGate unit
FortiGate-3016B, FortiGate-3600A and FortiGate-3810A FortiOS 3.0 MR5 Install Guide
01-30005-0343-20071113
The FortiGate unit starts and the Power and Status LEDs light up. The Status
LEDs flash while the FortiGate unit starts up, and remain lit when the system is
running.
Note: If only one power supply is connected, an audible alarm sounds to indicate a failed
power supply. Press the red alarm cancel button on the rear panel next to the power supply
to stop the alarm.
Table 1: LED indicators for the FortiGate-3600A and FortiGate-3810A
LED State
Power Green
Off
Staus Green
Flashing
Hi-Temp Green
FortiGate-3600A
Off
Interface LEDs Green
Flashing
Green
Off
Table 2: LED indicators for the FortiGate-3016A
LED State
Power Green
Off
Staus Green
Flashing
Port 1 and 2 Green
(Right)
Flashing
Green
Port 1 and 2 Green
(Left)
Amber
Off
Port 3 to 18 Green
Flashing
Green
Description
The FortiGate unit is powered on.
The FortiGate unit is powered off.
The FortiGate unit is on and running normally.
The FortiGate unit is starting up
The internal temperature has reached abnormally high
temperatures.
Normal internal temperature range.
The correct cable is in use and the connected
equipment has power.
Ports 1 to 8 connect at 10/100/1000 Mb.
Ports 9 and 10 connect at up to 1000 Mb.
Network activity at this interface.
No link established.
Description
The FortiGate unit is powered on.
The FortiGate unit is powered off.
The FortiGate unit is on and running normally.
The FortiGate unit is powered off.
The correct cable is in use and the connected
equipment has power.
Network activity at this interface.
Connection at 1000 Mb.
Connection at 100 Mb
Connection at 10 Mb.
The correct cable is in use and the connected
equipment has power.
Network activity at this interface.
Powering on the FortiGate unit
17