Document Conventions; Typographic Conventions; Fortigate Documentation - Fortinet FortiGate FortiGate-3016B Install Manual

Introduction

Document conventions

FortiGate documentation

FortiGate-3016B, FortiGate-3600A and FortiGate-3810A FortiOS 3.0 MR5 Install Guide
01-30005-0343-20071113
This document contains the following chapters:
• Installing the FortiGate unit
FortiGate unit.
• Factory defaults – Provides the factory default settings for the FortiGate unit.
• Configuring – Provides an overview of the operating modes of the FortiGate
unit and how to integrate the FortiGate unit into your network.
• FortiGate Firmware – Describes how to install, update, restore and test
firmware for the FortiGate device.
The following document conventions are used in this guide:
• In the examples, private IP addresses are used for both private and public IP
addresses.
• Notes and Cautions are used to provide important information:
Note: Highlights useful additional information.
Caution: Warns you about commands or procedures that could have unexpected or
undesirable results including loss of data or damage to equipment.

Typographic conventions

FortiGate documentation uses the following typographical conventions:
Convention Example
Keyboard input In the Gateway Name field, type a name for the remote VPN
peer or client (for example, Central_Office_1).
Code examples
CLI command syntax
Document names FortiGate Administration Guide
Menu commands Go to VPN > IPSEC > Phase 1 and select Create New.
Program output
Welcome!
Variables <address_ipv4>
The most up-to-date publications and previous releases of Fortinet product
documentation are available from the Fortinet Technical Documentation web site
at http://docs.forticare.com.
The following FortiGate product documentation
– Describes setting up and powering on a
config sys global
set ips-open enable
end
config firewall policy
edit id_integer
set http_retry_count <retry_integer>
set natip <address_ipv4mask>
end
is available:
FortiGate documentation
11