Table of Contents
Advertisement
Figure 64. Hydraulic Oil Temperature Indicator
The low brake pressure indicator illuminates if the hydraulic
brake oil pressure gets low. If the low brake pressure indicator
is illuminated, stop the forklift, follow proper shut down
procedures, tag the forklift with "Do Not Operate" tags, and
have a qualified mechanic service or repair the forklift BEFORE
placing it into service again.
Figure 65. Low Brake Pressure Indicator
Warning
Stop
ON
ON
ON
FLASH
FLASH
ON
Figure 67. Engine Indicator Chart
Operation Manual
Engine Indicator Chart
L amp State
Lamp Check
No Faults
Ac ve Diagnos c
Derate
Shutdown
operator. Automa c shutdown will
occur a er a short period of me.
The rear axle lock indicator illuminates when the forklift is in
the axle lock mode. The rear axle locks when the parking brake
is set to ON (engaged), the transmission is in NEUTRAL or the
service brake applied, and when the boom is above 40°. If the
rear axle lock indicator does not illuminate, stop the forklift,
follow proper shut down procedures, tag the forklift with "Do
Not Operate" tags, and have a qualified mechanic service or
repair the forklift before placing it into service again.
Figure 66. Rear Axle Lock Indicator
Engine Indicator Chart
Two very important indicators for tier 4 interim diesel engines
are the Engine Warning Lamp and the Engine Stop Lamps,
shown in Figure 31. Below is a chart depicting all possible en-
gine states that can be indicated by a combination of these
two lamps.
Descrip on
Lamps come on for 5 seconds
Normal opera on
Minor fault present
Serious fault present
Engine should be shut down by
58
E ngine State
Igni on on, engine o
E ngine opera ng with no faults
Engine is opera ng normally with one
or more faults present
Engine opera ng with reduced power
Engine should be shut down or automa c
shutdown is imminent
Operation
Advertisement
Table of Contents
