Heater Setting
Update
Default
Insert a microSD Card
You can use a microSD card to increase file storage capacity or to install software.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC memory cards with the computer for maximum
performance and durability.
Caution: Always power off the computer before attempting to install or
Warning: If you have a CN80 NI/CN80G model certified for use in
Note: Format the memory card before initial use.
1. Save your files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Power Off.
4. Release one end of the hand strap.
5. Slide the battery latch to the right.
28
Description
Tap to apply changes made to settings.
Tap to set the Heater settings back to their default values.
remove a card.
hazardous locations, read
7.
About the optional Dust
Dolphin CN80 Mobile Computer
Cover, page