About The Optional Digital Scan Button; Enable And Configure The Digital Scan Button - Honeywell Dolphin CN80 Series User Manual

3. Tap and hold the profile you want to delete.
4. Select Delete, then select OK.

About the Optional Digital Scan Button

By default, the imager is enabled for scanning with the left, middle and right scan
buttons configured to trigger the imager. If your application environment requires
use of an on-screen scan button, enable the Digital Scan Button feature in the
Settings app. Once enabled, you can then modify the appearance of the on-screen
Scan button and select the apps the button appears in.

Enable and Configure the Digital Scan Button

1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Enable Digital Scan Button to turn the feature on. A preview of the button
4. Configure the button appearance. As you adjust the settings, the preview
5. Drag the preview button to the location where you want it to appear on the
6. Tap Choose Application.
7. Check the box next to all the applications where you want the digital scan
8. Select OK.
9. Tap Back to return to the Settings screen.
52
> Honeywell Settings > Digital Scan Button.
appears at the bottom of the screen.
button updates.
• Tap Select Button Size, and then choose Small, Medium or Large.
• Tap Select Button Color and then choose from seven color options. Default
color is black. Tap a dot to select the color, and then select OK to confirm.
• Use the slider under Transparency Level to adjust how transparent the
button appears on the application screen.
screen. Once you have positioned the button, tap the Set Button Location
toggle button to lock it into position.
button to be available.
The digital scan button appears on the screen when you open any of the apps
you selected during the button setup. Tap and hold the button to activate the
imager and scan a bar code.
Dolphin CN80 Mobile Computer