7. Install the:
a)
Heatsink assembly
b)
Hard drive and optical drive module
c)
HDD assembly
d)
Front bezel
e)
Side cover
8. Follow the procedure in
Speaker
Removing speaker
1. Follow the procedure in
2. Remove the:
a)
Side cover
b)
Front bezel
c)
HDD assembly
d)
Hard drive and optical drive module
3. To remove the speaker:
a) Disconnect the speaker cable from the connector on the system board [1].
b) Press the release tab [2] and pull the speaker out from the system [3].
56
Removing and installing components
After working inside your
computer.
Before working inside your
computer.
Need help?
Do you have a question about the OptiPlex 5070 Small Form Factor and is the answer not in the manual?
Questions and answers