Expansion Card; Removing Expansion Card - Dell OptiPlex 5070 Small Form Factor Service Manual

3. Follow the procedure in

Expansion card

Removing expansion card

1. Follow the procedure in
2. Remove the Side cover.
3. To remove the expansion card:
a) Pull the metal tab to open the expansion card latch [1].
b) Pull the release tab at the base of the expansion card [2].
NOTE: Applies to x16 card slot, x1 card has no release tab.
c) Disconnect and lift the expansion card away from the connector on the system board [3].
16 Removing and installing components
After working inside your computer
Before working inside your computer.