Intrusion Switch; Removing Intrusion Switch - Dell OptiPlex 5070 Small Form Factor Service Manual

4. Install the:
a) Hard drive and optical drive module
b) HDD assembly
c) Front bezel
d) Side cover
5. Follow the procedure in

Intrusion switch

Removing intrusion switch

1. Follow the procedure in
2. Remove the:
a) Side cover
b) Front bezel
c) HDD assembly
d) Hard drive and optical drive module
e) Heat sink assembly
3. To remove the intrusion switch:
a) Disconnect the intrusion switch cable from the connector on the system board [1].
b) Slide the intrusion switch and lift it away from the system [2].
44 Removing and installing components
After working inside your computer.
Before working inside your computer.