4. Install the:
a)
Heat sink assembly
b)
Hard drive and optical drive module
c)
HDD assembly
d)
Front bezel
e)
Side cover
5. Follow the procedure in
M.2 PCIe SSD
Removing the M.2 PCIe SSD
NOTE:
The instructions are applicable to M.2 SATA SSD also.
1. Follow the procedure in
2. Remove the:
a)
Side cover
b)
Front bezel
c)
HDD assembly
d)
Hard drive and optical drive module
e)
Heatsink assembly
50
Removing and installing components
After working inside your
computer.
Before working inside your
computer.
Need help?
Do you have a question about the OptiPlex 5070 Small Form Factor and is the answer not in the manual?
Questions and answers