Fortinet FortiGate FortiGate-100 Install Manual page 54

Configuring the modem for the FortiGate-50A
54
Enter the password used to access the
passwd2
specified dialup account.
<password_str>
Enter the password used to access the
passwd3
specified dial-up account.
<password_str>
Table 15: CLI commands for the FortiGate-50A
If the modem at phone1 is Actiontec or
peer_modem1
AscendTNT, select that type, otherwise leave
{actiontec |
setting as generic. This setting applies to
ascendTNT |
models 50AM, 60M, and WiFi-50BM only.
generic}
If the modem at phone2 is Actiontec or
peer_modem2
AscendTNT, select that type, otherwise leave
{actiontec |
setting as generic. This setting applies to
ascendTNT |
models 50AM, 60M, and WiFi-50BM only.
generic}
If the modem at phone3 is Actiontec or
peer_modem2
AscendTNT, select that type, otherwise leave
{actiontec |
setting as generic. This setting applies to
ascendTNT |
models 50AM, 60M, and WiFi-50BM only.
generic}
Enter the phone number required to connect to
phone1
the dial-up account. Do not add spaces to the
<phone-number>
phone number. Make sure to include standard
special characters for pauses, country codes,
and other functions as required by your modem
to connect to your dial-up account.
Enter the phone number required to connect to
phone2
the dialup account. Do not add spaces to the
<phone-number>
phone number. Make sure to include standard
special characters for pauses, country codes,
and other functions as required by your modem
to connect to your dialup account.
Enter the phone number required to connect to
phone3
the dialup account. Do not add spaces to the
<phone-number>
phone number. Make sure to include standard
special characters for pauses, country codes,
and other functions as required by your modem
to connect to your dialup account.
Set the maximum number of times (1-10) the
redial
FortiGate unit dials the ISP to restore an active
<tries_interger>
connection on the modem interface. Select
none to allow the modem to redial without a
limit.
Enable or disable modem support.
status {disable |
enable}
Enter the user name used to access the
username1
specified dial-up account.
<name_str>
Enter the user name used to access the
username2
specified dialup account.
<name_str>
Enter the user name used to access the
username3
specified dialup account.
<name_str>
FortiGate-50A/50B, FortiWiFi-50B and FortiGate-100 FortiOS 3.0 MR4 Install Guide
Configuring the modem interface
No default.
No default.
generic
generic
generic
No default.
No default.
No default.
No default.
disable
No default.
No default.
No default.
01-30004-0265-20070831