Table of Contents
Advertisement
MENU01：Steering monitor
▶Displays the current position of steering.
If steering direction is changed in reverse position,
movement of steering and L/R will be reversed accordingly.
MENU02：Steering trim
▶Neutral position of steering can be adjusted while running.
Adjust using
＋/− keys. Push both keys together to reset.
※Max. width may be changed according to steering
travel/balance settings.
The position of the end point does not move.
Only the neutral position moves.
When changing the edge of movement, adjust in
"MENU08:Steering sub trim".
Steering trim can also be adjusted by using ET1 lever.
MENU03：Steering travel
▶This function allows you to adjust the amount of
servo movement when fully turning steering wheel.
Adjust using
＋/− keys. Push both keys together to reset.
Make sure the setting does not cause excessive force to
Caution!
the servo as it may result in malfunction.
Steering travel can also be adjusted using ET3 lever.
When adjusting right and left movement individually, adjust in
"MENU04: Steering balance R" and "MENU05: Steering balance L".
MENU04：Steering balance R
▶This function allows you to adjust right turning angle
(Use to correct left and right turning radius)
Adjust using
＋/− keys. Push both keys together to reset.
Fully turn steering wheel to right and operate ET1 lever to
make setting of steering balance R.
Neutral position
Ｌ50 〜 ０ （Default setting） 〜 Ｒ50
40 〜 100 （Default setting） 〜 120
ET3 lever
40 〜 70 （Default setting） 〜 100
Steering wheel
■MENU 01〜04
ET1 lever
+ key
− key
+ key
− key
ET1 lever
+ key
− key
7
Advertisement
Table of Contents
