Ko Propo EX-5FH Instruction Manual page 14

MENU24：Model reset
▶This will erase all data of model memory.
Adjust using
Hold + key for a while to erase
※LCD turns off when setting is finished.
Caution!
Memory will be reset back to the factory settings.
MENU25：Model copy
▶Save the current model memory to other model memory
Adjust using
1. Push ＋ key.
2. Use Forward/Back keys to choose
a copy place (model number).
3. Push ＋ key to copy.
※Copying data of model memory is useful when adjusting
chassis setting according to condition of the track.
Caution!
Please be sure that copy destination data will be overwritten.
Caution!
The mode will be moved to model select of copy destination.
If copying model 1 to model 2, model select will be changed to
model 2 and data of model 1 (original data) will be saved.
MENU26：Model name
▶Putting a name in the model memory.
Adjust using
1. Push ＋ key.
2. Push ＋/− keys to select alphabets
and numbers.
3. Push Forward/Back keys to select letters.
4. Push Forward key after selecting 4th letter.
Push ＋ key after LCD displaying EXIT .
All usable letters: −＊／＠＿￣￥＼０１２３４５６７８９
ＡｂＣｄＥＦＧＨＩＪＫＬＭＮＯＰＱＲＳＴＵＶＷＸＹＺ ＋
MENU27：Model select
▶You can change current model memory to other
model memory.
Adjust using
1. Push ＋ key
2. Push Forward/Back keys to choose
other model memory.
3. Push ＋ key to set.
You can save the model memory for 7 cars. It is useful to save each
model memory to use several cars. Even the same car can have
multiple numbers due to changes to the settings at every course.
Caution!
Can cause of out of control operation when changing model
memory while running.
14
■MENU 24〜27
Reset
Copy
Foward key
Registration
Foward key
Select
Foward key
+ key
+ key
Back key
+ key
− key
Back key
+ key
Back key