MENU12:Throttle high point
▶Sets only the max forward movement on throttle.
(Allows you to adjust highest point of ESC of electric car
or high carburetor of gas car)
Adjust using
+/− keys. Push both keys together to reset.
Caution!
Creating a large value for a gas car puts an increase burden on
servo and may result in damage.
Caution!
In an electric car, when set value is too small the ESC can not
show a better performance. Please start from +70 (factory
setting) setup.
Caution!
Minimum value is 0 but doesn t operate to forward. Also,
throttle servo does not move.
Caution!
When a small the value of Throttle high point is made, and
then a large value in MENU11: Throttle trim is set to an advance
direction, the amount of operation will be extremely small.
MENU13:Throttle brake
▶Adjust only the brake of throttle and max movement
of reverse running.
Adjust using
+/− keys. Push both keys together to reset.
Caution!
In an Electric car, a value set too small the ESC will not show
better performance. Please start from +70 (factory setting) in
this case.
Caution!
Keep in mind that a brake or reverse running does not work
when a set up is 0. Please check the brake before running as
functions of ESC also effects on.
MENU14:Throttle speed
▶Adjust response when pulling throttle trigger
in forward position.
Adjust using
+/− keys. Push both keys together to reset.
※To improve response, adjust in + direction.
※To improve handling, adjust in − direction
Throttle speed + may not work effectively due to performance
of servo.
10
0 〜 70 (Default setting) 〜 100
0 〜 70 (Default setting) 〜 100
100 〜 0 (Default setting) 〜 +30
■MENU 12〜14
+ key
− key
+ key
− key
+ key
− key