Name Of Parts; Unit Preparation - Ko Propo EX-5FH Instruction Manual

Name of parts
LCD display (factory setting)
Model name (MENU26)
LCD indicates voltage after a certain period of time.
※Alarm sounds when batteries are depleted. Install fresh
batteries as soon as possible to keep radio power.
●Receiver （ KR-211FH/212FHG）
Channel 1〜2
connector
Power
connector
(KR-212
FHG only)
2 1
LED indicator
※Regarding servo and ESC, please refer
each set-supplied instruction manual.
Unit preparation
1.
Install receiver, servo, ESC (when using with electric car) and connect cables. Install
receiver noting anti-noise measures. ←Refer to P.4
※Read instructions included with servo and speed controller before connection and usage.
2.
Install batteries (R6/AA/UM3 size batteries x
8) to transmitter, then install running battery
to electric R/C car. For gas R/C car, install
receiver batteries.
※Note polarity and install fresh batteries. Depleted batteries
may deteriorate radio power and cause problems.
3.
Register the transmitter to the receiver to complete pairing ←Refer to P.5
※EX-5UR requires pairing to register the transmitter ID number to the receiver the first time you use.
When operating several receivers (cars) using one transmitter, perform "pairing" for each receivers only first time you use.
4.
Adjust steering and throttle/brake settings ←Refer to P.5
5.
Adjust failsafe ←Refer to P.15
Voltage
ET3 lever
(Steering travel)
Battery
ET4 lever
connector
(3ch control)
Ch1 : Sterring servo
CH2 : ESC or Throttle servo
Set button
Transmitter (bottom)
●Transmitter
（EX-5FH）
Antenna
Steering wheel
Battery cover
■ Name of parts／Unit preparation
ET1 lever
(Steering trim)
ET2 lever
(Throttle trim)
Foward key
+/ Enter key
−/ Cancel key
Back key
Power switch
Throttle trigger
Battery box (inside)
R6/AA/UM3 battery
Battery box
3