Removing The Keyboard - Clevo W241BU Service Manual

Removing the Keyboard

1. Turn off the computer, and remove the battery
2. Press the four keyboard latches at the top of the keyboard
position (you may need to use a small screwdriver to do this).
3. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable
4. Disconnect the keyboard ribbon cable
5. Carefully lift up the keyboard
a.
2
1
b.
5
(page 2 - 5).
(Figure
from the locking collar socket
5
(Figure 9c) off the computer.
7
c.
3 4
5
6
9a) to elevate the keyboard from its normal
(Figure 9b).
(Figure 9b).
6
7
Keyboard Tabs
Disassembly
Figure 9
Keyboard Removal
a. Press the four latches to
release the keyboard.
b. Lift the keyboard up and
disconnect the cable
from the locking collar.
c. Remove the keyboard.

Re-Inserting the Key-
board
When re-inserting the
keyboard firstly align
the four keyboard tabs
at the bottom of the
keyboard with the slots
in the case.

7. Keyboard
Removing the Keyboard 2 - 13