Table of Contents
Advertisement
Removing the Keyboard
1. Turn off the computer, and remove the battery
2. Remove screws
-
from the bottom of the computer. Press at points
1
4
(you may need to use the Eject Pin Tool to do this
3. Remove the LED cover module
4. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable
ribbon cable
from the locking collar socket
12
5. Carefully lift up the keyboard
a.
2
1
5
b.
7
8
(page 2 -
5).
(Figure
11a).
and screws
-
from the keyboard
7
11
6
(Figure
11c)
13
(Figure
11d) off the computer.
14
c.
4
3
5
9
10
11
6
to unsnap the LED cover module
5
(Figure
11b).
. Disconnect the keyboard
12
12
13
d.
14
Keyboard Tabs
Disassembly
Figure 11
Keyboard Removal
a. Remove screws from the
6
bottom of the computer.
Press at points
5
to un-
snap the LED cover
module.
b. Remove the LED cover
module
and
screws
from the keyboard.
c. Carefully lift the key-
board up and disconnect
the keyboard ribbon ca-
ble from the locking col-
lar socket.
d. Remove the keyboard.
Re-Inserting the
Keyboard
When re-inserting the
keyboard firstly align the
four keyboard tabs at
the bottom
(Figure
11c)
at the bottom of the key-
board with the slots in the
case.
6. LED Cover Module
14. Keyboard
• 9 Screws
Removing the Keyboard 2 - 15
Advertisement
Table of Contents
