Removing The Keyboard - Clevo N250WU Sevice Manual

Disassembly

Removing the Keyboard

Figure 5
Keyboard Removal
1. Turn off the computer, turn it over to remove the battery
2. Remove screws
a. Remove the screws.
3. Open it up with the LCD on a flat surface before pressing at point
b. Release the keyboard by
ing the keyboard in the direction of the arrow
pressing at point 3 .
4. Carefully lift the keyboard
c. Disconnect the keyboard
ribbon cable from the board ribbon cable from the locking collar socket
locking collar socket.
5. Carefully lift up the keyboard
d. Remove the keyboard.
a.
b.

5. Keyboard
• 2 Screws
2 - 10 Removing the Keyboard
- from the bottom case (Figure
1 2
as shown
4
up, being careful not to bend the keyboard ribbon cable
5
7
off the computer
5
1
2
4
3
(page 2 - 5).
5a).
to release the keyboard module while releas-
3
(Figure 5c).
(Figure 5d).
(Figure 5e).
c.
5
d.
. Disconnect the key-
6
6
7 7
5