Error Codes; Display Units - Sony ZRD-1 Operating Instructions Manual

Error Codes

When a system error or warning occurs, verify the error code as follows.
For display units:
Under [Array Information] in the main screen, double-click within the frame of the display unit or right-click it and select
[Display Unit Info.] to display the [Display Unit Information] screen and the error code.
For display controllers:
Under [Controller List] in the main screen, double-click the display controller number or right-click it and select
[Controller Info.] to display the [Controller Information] screen and the error code.

Display Units

Errors
Error code Category
102 Power
104
111 Temperature
110
113
121 Board
122
130 Connection/
communication
Warnings
Warning Category
code
310 Temperature/fan Temperature (UC / Ambient)
313
315
316
321 Board
322
330 Connection/
communication
340 System
350
Definition
Main Power (VDD1 / VDD2)
AC Power Supply
Temperature (UC)
Temperature (Ambient)
Temperature (CELL_1 to CELL_12)
UC Board (Power-up Sequence / Shut-
Down Sequence / Power Supply / Flash
Data Error / IC Setting / Other)
UP Board (CELL_1 to CELL_12)
Connection_Error / RS485
Communication / Video Input Signal /
Connection_Error / RS485
Communication / Video Input Signal
Definition
Temperature (CELL_1 to CELL_12)
Fan (Right): stop / speed-down
Fan (Right): performance degradation
Fan (Left): stop / speed-down
Fan (Left): performance degradation
UC Board (Reserved)
UP Board (Reserved)
UNIT Communication (RS485)
RS485 Wrong Command / Video Input Check that all cables are properly connected. If the problem
Update (UNIT FPGA)
Solution
Contact your local Sony representative.
Check the device environment and remove any obstructions from
the fan and intake vent. If the problem persists, contact your
local Sony representative.
Contact your local Sony representative.
Check that all cables are properly connected. If the problem
persists, contact your local Sony representative.
Solution
Check the device environment and remove any obstructions from
the fan and intake vent. If the problem persists, contact your
local Sony representative.
Check the fan status and running time.
Check the device environment and remove any obstructions from
the fan and intake vent. If the problem persists, contact your
local Sony representative.
Check the fan status and running time.
Turn the power off and turn it on again. If the problem persists,
contact your local Sony representative.
Check the fan status and running time.
persists, contact your local Sony representative.
Perform update again. If the problem persists, contact your local
Sony representative.
17