JVC CA-MXS6MDR Service Manual page 8

CA-MXS6MDR
SP-MXS6MD
Removing the MD changer mechanism
Prior to performing the following procedure, remove
the top cover and the CD changer mechanism
assembly.
1. Disconnect the card wire from connectors CN511 on
the main board.
2. Remove the four screws I on both sides of the body.
3. Pull out the MD changer mechanism assembly from
behind upward while releasing the four joints d using
a screwdriver.
Removing the microcomputer board
Prior to performing the following procedure, remove
the top cover.
1. Disconnect the card wire from connector CN801 on
the microcomputer board.
2. Remove the screw D attaching the microcomputer
board.
3. Disconnect the lower connector CN391, CN392 and
CN393 from the main board by pulling them.
1-8
(See Fig.11 to 13 )
(See Fig.14)
MD changer
mechanism assembly
Fig.11
I
Fig.12
d
Joints
MD changer mechanism assembly
Fig.13
Fig.14
I
MD changer
mechanism assembly
CN511
Joints
Microcomputer board
D
CN801
CN393
CN392
CN391
d