Adjustment Method - JVC CA-MXS6MDR Service Manual

Adjustment method

This model is auto adjust system.
MD TEST MODE 1
1.Setting the TEST MODE1
(CAUTION) MD mode should NO
DISC condition, when POWER
ON to not read TOC.
Press [STOP key] and
[CANCEL key] together,
and connect the power cord.
LCD indication
MD TEST MODE 1
Setting the MD TEST MODE1
by press [POWER key]
LCD indication
[HELLO] then
[MD TEST MODE 1]
Setting OK
2.Initialize the EEPROM
Setting the MD TEST MODE 1
Press [REC PAUSE key]
of the Remote controller
LCD indication
DATA INITIAL
Initialize OK
3.Laser power adjustment
Insert the sensor
of laser power meter
Press [ 2 key ] of
Remote controller
LCD indication
L.POWER PLAY
Adjust the PLAYBACK
laser power
Laser power up by [ key]
of Remote controller
LCD indication
L.POWER UP
0.68mW
Press [STOP key] of
Remote controller
Playback laser power
adjustment complete
Press [ 4 key] of
Remote controller
LCD indication
L.POWER REC
Adjust the RECORDING
laser power
Laser power up by [ key]
of Remote controller
LCD indication
L.POWER UP
6.23mW
Press [STOP key] of
Remote controller
Press [EJECT key]
of main body
Adjustment complete
CA-MXS6MDR
SP-MXS6MD
Laser power down by [
of Remote controller
LCD indication
L.POWER DOWN
Adjustment
Laser power down by [
of Remote controller
LCD indication
L.POWER DOWN
Adjustment
key]
key]
1-31