JVC CA-MXS6MDR Service Manual page 10

CA-MXS6MDR
SP-MXS6MD
Removing the heat sink assembly
Prior to performing the procedure, remove the top
cover, the CD changer mechanism assembly, the
rear cover, the rear panel, the tuner board and the
input board.
1. Remove the four screws S attaching the bracket.
2. Disconnect connector CN924 and CN394 from the
main board.
Removing the regulator board / the
amplifier board (See Fig.21)
Prior to performing the procedure, remove the top
cover, the CD changer mechanism assembly, the
rear cover, the rear panel, the tuner board, the input
board and the heat sink assembly.
1. Remove the two screws T
regulator board and the amplifier board to the heat
sink.
1-10
(See Fig.19 and 20)
or U attaching the
S
Fig.19
Fig.20
Heat sink
T
Regulator board
Fig.21
Heat sink assembly
Bracket
S
Heat sink assembly
Main board
CN394
CN924
U
Amplifier board