Disassembly And Replacement - Toshiba e-STUDIO163 Service Manual

6.6

Disassembly and Replacement

[A] Original glass
(1) Remove 2 rubber caps and 2 screws, take off
the original glass holder while sliding it to the
right.
(2) Remove 2 rubber caps and 2 screws, take off
the original glass.
Notes:
1. When handling the original glass, take
care not to contaminate the surface with
fingerprints or such.
2. Do not place the original glass directly on
the floor.
3. When installing the original glass, fit 2
guides of the original glass in the groove
of the scanner top cover.
(3) Take off the ADF original glass.
e-STUDIO163/203
SCANNER
Rubber cap
ADF Original glass
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
6 - 12
07/02
Original glass holder
Fig. 6-7
Rubber cap Original glass
Fig. 6-8
Fig. 6-9