Toshiba e-STUDIO163 Service Manual page 175
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO163:
- Service handbook (235 pages) ,
- Service manual (222 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
(5)
Remove the terminal and spring. Then take
off the transfer charger wire.
(6)
Remove the cushioning material, disconnect
the terminal and remove the spring. Then
take off the separation charger wire.
Notes:
1. Insert the wire securely into the V-
grooves of the front and rear sides.
2. Do not twist the wire.
3. Do not touch the wire directly with bare
hands.
[N] Transfer unit
Note:
When taking off the transfer unit, take off the process unit first to prevent the drum from light.
(1)
Open off the ADU cover.
(2)
Take off 2 guides.
(3)
Take off the transfer unit while pulling the
lever.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Cushioning material
Terminal
Spring
Fig. 11-26
Fig. 11-27
Fig. 11-28
11 - 17
Separation charger wire
Transfer charger wire
Guide
Transfer unit
e-STUDIO163/203
DRUM RELATED SECTION
11
Advertisement
Table of Contents
