Toshiba e-STUDIO163 Service Manual page 215
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO163:
- Service handbook (235 pages) ,
- Service manual (222 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
(5)
Remove 1 clip and 1 bushing.
(6)
Take off the exit roller by sliding it to the rear
side.
[D] Exit sensor (S5)
(1)
Take off the fuser/paper exit unit.
P.13-11 "[A] Fuser/Paper exit unit"
(2)
Release the stopper using a flathead screw-
driver.
(3)
Open the guide and slide it to the front side.
Then slide its rear hinge downward.
Note:
Keep the guide being slid to the front side
during the steps (3) and (4).
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Exit roller
Fig. 13-12
Fig. 13-13
Fig. 13-14
13 - 13
07/02
Clip
Bushing
Stopper
Stopper
1
2
Guide
e-STUDIO163/203
FUSER / EXIT UNIT
13
Advertisement
Table of Contents
