10.5 Disassembly and Replacement
[A] Bypass unit
(1)
Take off the ADU cover.
P.2-21 "[G] ADU cover"
(2)
Remove 1 screw and take off the harness
cover.
(3)
Release the harness from the harness clamp
and disconnect 1 connectors.
(4)
Remove 2 screws, and take off the bypass
unit by lifting it up.
Note:
When installing the bypass unit, place the
guide behind the transfer unit.
e-STUDIO163/203
PAPER FEEDING SYSTEM
Guide
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
10 - 10
Screw
Harness cover
Fig. 10-6
Connector
Fig. 10-7
Screw
Screw
Bypass unit
Fig. 10-8