i3 International S81 User Manual page 38

SNMP TRAP Configuration Parameters:
Items
Trap Mode
Trap Destination
Configurations
Name
Enable
Version
Trap Community
Destination Address
Destination Port
Trap Inform Mode
Trap Inform Timeout
(seconds)
Trap Inform Retry Times
Description
Indicates the Trap mode operation. Possible modes are:
Enabled: Enable trap mode operation.
Disabled: Disable trap mode operation.
Configure trap destination on this page
Indicates the trap configuration's name. Indicates the trap destination's name.
Indicates the trap destination mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disable: Disable SNMP trap mode operation.
Indicates the SNMP trap supported version. Possible versions are:
SNMPv1: Set SNMP trap supported version 1.
SNMPv2c: Set SNMP trap supported version 2c.
SNMPv3: Set SNMP trap supported version 3.
Indicates the community access string when sending SNMP trap packet. The allowed string
length is 0 to 255, and the allowed content is ASCII characters from 33 to 126.
Indicates the SNMP trap destination address. It allow a valid IP address in dotted decimal
notation ('x.y.z.w'). And it also allow a valid hostname. A valid hostname is a string drawn
from the alphabet (A-Za-z), digits (0-9), dot (.), dash (-). Spaces are not allowed, the first
character must be an alpha character, and the first and last characters must not be a dot or
a dash.
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-bit records
represented as eight fields of up to four hexadecimal digits with a colon separating each
field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can
be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but
it can appear only once. It can also represent a legally valid IPv4 address. For example,
'::192.1.2.34'.
Indicates the SNMP trap destination port. SNMP Agent will send SNMP message via this
port, the port range is 1~65535.
Indicates the SNMP trap inform mode operation. Possible modes are: Enabled: Enable
SNMP trap inform mode operation. Disabled: Disable SNMP trap inform mode operation.
Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147.
Indicates the SNMP trap inform retry times. The allowed range is 0 to 255.
37