i3 International S81 User Manual page 10

IGMP Proxy
MLD v1/v2 Snooping
Device Management System (DMS)
Graphical Monitoring
Traffic Monitoring
Trouble Shooting
Layer 3 Switching
IPv4 Static Routing
IPv6 Static Routing
Security
Secure Shell (SSH)
Secure Sockets Layer (SSL)
IEEE 802.1X
Layer 2 Isolation Private VLAN Edge
Port Security
IP Source Guard
RADIUS/ TACACS+
Storm Control
DHCP Snooping
ACLs
Quality of Service
Hardware Queue
Scheduling
IGMP snooping with proxy reporting or report suppression actively filters
IGMP packets in order to reduce load on the multicast router
Delivers IPv6 multicast packets only to the required receivers
 Topology view: Support intuitive way to configure and manage
switches and devices with visual relations
 Floor view: It's easy to drag and drop PoE devices and help you to build
smart workforces
 Map view: Enhance efficiency to drag and drop devices and monitor
surroundings on google map
Display visual chart of network traffic of all devices and monitor every port
at any time from the switch.
 Network diagnostic between master switch and devices
 Support protection mechanism, such as rate-limiting to protect your
devices from brute-force downloading
IPv4 Unicast: Static routing
IPv6 Unicast: Static routing
SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are
supported.
SSL encrypts the HTTP traffic, allowing advanced secure access to the
browser-based management GUI in the switch.
 IEEE802.1X: RADIUS authentication, authorization and accounting,
MD5 hash, guest VLAN, single/multiple host mode and single/multiple
sessions
 Supports IGMP-RADIUS based 802.1X

Dynamic VLAN assignment
PVE (also known as protected ports) provides L2 isolation between clients in
the same VLAN. Supports multiple uplinks.
Locks MAC addresses to ports and limits the number of learned MAC
addresses
Prevents illegal IP address from accessing to specific port in the switch.
Supports RADIUS and TACACS+ authentication. The switch as client
Prevents traffic on a LAN from being disrupted by broadcast, multicast, or
unicast storm on a port.
A feature acts as a firewall between untrusted hosts and trusted DHCP
servers
Supports up to 256 entries. Drop or rate limitation based on:
 Source and destination MAC, VLAN ID or IP address, protocol, port,

Differentiated services code point (DSCP) / IP precedence
 TCP/ UDP source and destination ports
 802.1p priority
 Ethernet type
 Internet Control Message Protocol (ICMP) packets

TCP flag
Supports 8 hardware queues
 Strict priority and weighted round-robin (WRR)
 Queue assignment based on DSCP and class of service
9