i3 International S81 User Manual page 189

sFLOW Parameters:
Items
Owner
IP Address/Hostname
Timeout
Tx Successes
Flow Samples
Counter Samples
Port Statistics
Port
Rx and Tx Flow
Samples
Counter Samples
Buttons
Description
This field displays the current owner of the sFlow configuration. It assumes one of three values
as follows:
If sFlow is currently not configured/unclaimed, Owner contains <none>.
If sFlow is currently configured through Web or CLI, Owner contains <Configured through local
management>.
If sFlow is currently configured through SNMP, Owner contains a string identifying the sFlow
receiver.
The IP Address or hostname of the sFlow.
The number of seconds remaining before sampling stops and the current sFlow owner is
released.
The number of UDP datagrams successfully sent to the sFlow receiver.
The total number of flow samples sent to the sFlow receiver.
The total number of counter samples sent to the sFlow receiver.
The port number for which the following statistics applies.
The number of flow samples sent to the sFlow receiver originating from this port. Here flow
samples are divided into RX and TX flow samples where RX flow samples contains the number
of packets that were sampled upon reception (ingress) on the port and TX flow samples
contains the number of packets that were sampled upon transmission (egress) on the port.
The total number of counter samples sent to the sFlow receiver originating from this port.
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Refresh: Click to manually refresh the page.
Clear Receiver: Clears the sFlow receiver counters.
Clear Ports: Clears the per-port counters
188