i3 International S81 User Manual page 123

QoS Control List Configuration Parameters:
Items Description
QCE# Indicates the index of QCE
Port Indicates the list of ports configured with the QCE.
DMAC Indicates the destination MAC address. Possible values are:
Any: Match any DMAC
Unicast: Match unicast DMAC.
Multicast: Match multicast DMAC.
Broadcast: Match broadcast DMAC.
MAC: Match specific DMAC.
The default value is Any
SMAC Match specific source MAC address or 'Any'. If a port is configured to match on DMAC/DIP, this field
indicates the DMAC.
Tag Indicates the tag type. Possible values are:
Any: Match tagged and untagged Frames.
Untagged: Match untagged Frames
Tagged: Match tagged Frames.
C-Tagged: Match C-Tagged Frames
S-Tagged: Match S-Tagged frames.
The default value is 'Any".
VID Indicates the VLAN ID, either a specific VID or range of VIDs can be in the range of 1-4095 or 'Any'.
PCP Priority Code Point. Valid values of PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1, 2-3, 4-5, 6-7, 0-
3, 4-7) or 'Any'.
DEI Drop Eligible indicator. Valid value of DEI are 0,1 or 'Any'.
Frame Type Indicates the type of frame to look for incoming frames. Possible frame types are:
Any: The QCE will match all frame types.
Ethernet: Only Ethernet frames with Ether Type 0x600-OxFFFF are allowed.
LLC: Only LLC frames are allowed.
Snap: Only SNAP frames are allowed.
IPv4: The QCE will match only IPv4 frames.
IPv6: The QCE will match only IPv6 frames.
122