i3 International S81 User Manual page 23

Time Configuration Parameters:
Items
Clock Source
System Date
Parameters System Date:
Time Zone
Acronym
Daylight Saving Time Configuration:
Daylight Saving Time
Recurring Configuration:
Start time Settings
End time Settings
Offset Settings
Description
There are two modes for configuring the Clock Source. Select "Use Local Settings": The
Clock Source from Local Time. Select "Use NTP Server": The Clock will Source from NTP
Server.
Show the current time of the system. The year of system date limits between 2011 and
2037
Lists various Time Zones worldwide. Select appropriate Time Zone from the drop down and
click Apply to set.
User can set the acronym of the time zone. This is a User configurable acronym to identify the
time zone. (Range: Up to 16 characters).
This is used to set the clock forward or backward according to the configurations set below
for a defined Daylight Saving Time duration. Select 'Disable' to disable the Daylight Saving
Time configuration. Select 'Recurring' and configure the Daylight Saving Time duration to
repeat the configuration every year . Select 'Non-Recurring' and configure the Daylight
Saving Time duration for single time configuration. The default setting is Disabled.
Week – Select the starting week number.
Day – Select the starting day number
Month – Select the starting month.
Hours – Select the starting hour.
Minutes – Select the starting minute.
Week – Select the ending week number.
Day – Select the ending day number
Month – Select the ending month.
Hours – Select the ending hour.
Minutes – Select the ending minute.
Offset - Enter the number of minutes to add during Daylight Saving Time. (Range: 1 to 1440)
22