Initial Settings - Kenwood DDX9017DABS Instruction Manual

Initial Settings

Initial setup
Perform this setup when you use this unit first
time.
1
Set each item as follows.
Language
■
Select the language used for the control
screen and setting items. Default is "British
English (en)".
1 Touch [Language].
2 Touch [Language Select].
3 Select the desired language.
4 Touch [
].
For detailed operation, see User Interface
Setup (P.58).
Clock
■
Sets the synchronization of the clock and
adjusts it.
For detailed operation, see Calendar/clock
settings (P.11).
Display
■
Set the button illumination color.
If it is hard to see the image on the screen
even after adjusting the front panel angle,
adjust the viewing angle.
1 Touch [Display].
2 Touch [Key Color].
3 Select the desired color.
4 Touch [
].
5 Touch [Viewing Angle].
6 Select a viewing angle
7 Touch [
].
For detailed operation, see Display Setup
(P.61).
Camera
■
Set the parameters for the camera.
1 Touch [Camera].
2 Set each item and touch [
For detailed operation, see Camera Setup
(P.54).
DEMO
■
Set the demonstration mode. Default is "OFF"
(Region 2/3)/ "ON" (Region 4).
1 Touch [DEMO] and set ON or OFF.
2
Touch [Finish].
NOTE
• These settings can be set from the SETUP menu.
See Setting Up (P.57).
Basic Operations
].
9
English