Table of Contents
Advertisement
10 Troubleshooting
10.1
Error messages B-Control
Fig.49
Error code display
Fig.50
Fault code display
10.2
Error messages IniControl 2
Fig.51
Fig.52
Fig.53
MW-2000369-1
7642056 - v05 - 30012017
10.1.1
If an error is detected, the error code is displayed automatically.
MW-3000240-4
10.1.2
If a fault is detected, the fault code is displayed automatically.
MW-6000210-4
10.2.1
Resetting the control panel allows the appliance to be restarted.
The message
the problem, pressing the
thus eradicates the fault.
If several faults occur, they are displayed one after the other.
MW-5000060-3
10.2.2
Error code display
Note
The
and
icons flash.
Fault code display
Error messages
appears when a fault code is detected. After resolving
1. Reset the control panel by pressing the
when an error message is displayed.
In economy mode, the appliance will not run a domestic hot water
heating cycle after a central heating cycle.
2. Display the current operating status by briefly pressing the
Accessing the error log
Note
The error and fault codes are listed together in the log.
1. Access the menus by pressing the two keys on the right simultane
ously.
10 Troubleshooting
key resets the appliance's functions and
key for 3 seconds,
EFU C
key.
35
Advertisement
Table of Contents
