Table of Contents
Advertisement
5
Utilisation with the control panel B-Control
5.1
Use of the control panel
Fig.16
Fig.17
2''
Fig.18
5.2
Start-up
5.3
Shutdown
Fig.19
7642056 - v05 - 30012017
5.1.1
Press any key to turn on the backlight for the control panel screen.
The
Tab.3
Information menu
Chimney Sweep menu
Press the
MW-1000668-1
Press the
MW-1000667-1
Keep pressing the
MW-1000668-1
If the boiler was powered off:
A venting cycle is run automatically.
The display shows the operating status of the boiler, the heating flow tem
perature and any error codes.
5.3.1
MW-3000241-3
Browsing in the menus
Important
If no key is pressed within 3 minutes, the backlight will go out.
key is used to access the various menus:
Menus available
key to access the Information menu.
key for 2 seconds to access the Chimney Sweep menu.
key to scroll through the information.
Note
Thirty minutes after the
play goes back to the main display.
1. Check that the heating system and the boiler are adequately primed
with water. Recommended pressure: 0.15 MPa (1.5 bar).
2. Check that the storage tank is filled with fuel.
3. Open the oil inlet valve.
4. Switch on the boiler.
Switching off the heating
1. Turn the setting button
played.
Note
The frost protection function continues to run
5 Utilisation with the control panel B-Control
key is pressed for the last time, the dis
all the way to the left until
EFU C
is dis
17
Advertisement
Table of Contents
