Setting The Parameters; Modifying The User Parameters - NeOvo Condens EFU C 40 User Manual

Parameter Description
Number of pump start-ups
Number of reversal valve cycles
Number of hours' reversal valve operation
Number of burner start-ups in domestic hot water
production mode
Number of hours of burner operation in domestic
hot water production mode
Number of burner start-ups
Number of hours' burner operation
Number of safety lock-downs (E36)
Resetting the maintenance service
Tab.14
List of parameters in the
Parameter
Tab.15
List of parameters in the
Parameter
HOURS
MINUTE
DATE
MONTH
YEAR
8.2

Setting the parameters

Fig.38
7642056 - v05 - 30012017
: hour run meters
are reset.
sub-menu of the
Description
Timer programming for heating
Timer programming for cooling (only if cooling is activated)
sub-menu of the
Unit
Can be set from 0 to 23
Can be set from 0 to 59
Can be set from 1 to 31
Can be set from 1 to 12
Can be set from 2000 to 2100
Unit
hours
-
hours
-
hours
-
hours
-
-
, ,
menu
menu
8.2.1

Modifying the User parameters

Caution
Altering the factory settings may impair operation of the appliance.
1. Access the User menu.
Important
The User menu is available only when the
2. Select the desired sub-menu by pressing the
3. Confirm the selection by pressing the
8 Control panel settings IniControl 2
X
X
X
X
X
X
X
X
X
available
available
available
available
available
icon flashes.
or
key.
EFU C
key.
29