Canon MB5400 SERIES Online Manual page 716

Hide thumbs Also See for MB5400 SERIES:

Table of Contents

• Scanning documents from the ADF (Auto Document Feeder): Document (ADF Simplex),

Document (ADF Manual Duplex), Document (ADF Duplex), or Document (ADF/Platen)

• When Document (ADF/Platen) is selected and documents are placed both on the platen and

ADF, those placed on the ADF will be scanned.

Select the color mode in which to scan the item.

Select the size of the item to be scanned.

When you select Custom, a screen in which you can specify the paper size appears. Select a Unit,

then enter the Width and Height, and then click OK.

• Click Defaults to restore the specified settings to the default settings.

Select the resolution of the item to be scanned.

The higher the resolution (value), the more detail in your image.

• Only 300 dpi or 400 dpi can be set when Start OCR is selected in Application Settings.

Document Scan Orientation Settings...

This appears when you select ADF for Select Source.

Click to display the Document Scan Orientation Settings dialog box in which you can set the

orientation and binding side of the documents to be scanned from the ADF.

Troubleshooting