Table of Contents
Advertisement
9. Load only this sheet in cassette 1, with the ridges of the creases facing up and the edge of
the uncreased half facing away from you.
Important
• The screen for registering page size and media type is not displayed during any of the operations
available in the Maintenance screen. Therefore, printing will be executed even if paper other than
A4 or Letter-sized plain paper is loaded.
• Bottom Plate Cleaning cannot be performed from cassette 2. Load paper in cassette 1.
10. Pull out the output tray extension and open the paper output support.
11. Tap OK.
The paper now cleans inside the machine as it passes through.
Check the ridges of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning
again.
12. Tap OK when a message is displayed indicating that cleaning is finished.
Note
• When repeating Bottom Plate Cleaning, use a new sheet of paper.
If the problem remains after repeated cleaning, protrusions inside the machine may be stained. Carefully
wipe off any ink on the protrusions using a cotton swab or the like.
239
Advertisement
Table of Contents
Troubleshooting
